• Kema-Okolo Agberia Patience Department of Electrical Electronics Engineering, Delta State Polytechnic Ogwashi-Uku, Nigeria
  • Emordi Ngozi Grace Department of Welding and Fabrication Engineering,Delta State Polytechnic Ogwashi-Uku, Nigeria


With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded system which can monitor and control appliances and other devices locally using built-in input and output peripherals. The system has a delay of 2 minutes after the first call to initiate the next command. This project is made up of four vital units. These units are as follows: GSM module unit, peripheral interface control (PIC) unit, driver unit and a power monitoring and control unit. The GSM module is a GSM transceiver which gives the system access to the GSM service provider. The peripheral interface control (PIC) is programmed to carry out the OFF/ RESET operation according to the GSM commands while the driver and control unit consist of capacitors, resistors, diodes, regulators and electromagnetic relay is to effect power switching. The major component that performed the power control of 220v main supply and the automatic voltage regulation(AVR) is the automated electromagnetic relay. The project was realized.




How to Cite

Kema-Okolo Agberia Patience, & Emordi Ngozi Grace. (2024). DOMOTICS CONTROL USING GSM MODULE. BW Academic Journal, 1(2), 83–92. Retrieved from